Maine, New Jersey, New Hampshire, and Arizona are among the states where buyers are most likely to find the best bargains on small-scale photovoltaic (PV) systems, according to a new study from Lawrence Berkeley National Laboratory (LBNL).
Published this month, was aimed at identifying the characteristics of low-priced PV systems. “Ultimately,” the authors asked, “what can be done to reproduce or facilitate those conditions more broadly to drive down U.S. PV system prices?”
Researchers from LBNL, three universities, and the National Renewable Energy Laboratory looked at the characteristics of the least expensive PV systems, based on a database of 40,000 systems in 15 states (all installed in 2013). These PV systems had a rated capacity of between 1 and 15 kilowatts, were both residential and commercial, and included systems owned by third parties.
“Despite impressive recent cost reductions, installed prices for small-scale PV systems in the United States continue to show wide pricing differences depending on the location of the installation, the installer, the components of the system, and other factors,” co-author Ryan Wiser said in a statement. “Our work seeks to pinpoint the characteristics of recently installed PV systems at the lower end of the observed solar price range.”
The team used several definitions for “low-priced” (or LP) systems, but relied chiefly on one describing them at or below the 10th percentile in dollars per watt — that is, cheaper than 90% of all systems. Researchers established the threshold for a low-priced system at $3.46 per watt.
Overall, the authors noted a steep decline in system costs between 2000 and 2013, from an average of $13.37 per watt to $4.77 per watt. The average system size has doubled in capacity, from 3 kilowatts to 6 kW.
Factors that bring down prices
State-to-state differences were significant. In Maine, small-scale solar is 51 times more likely to be low-priced than in California, which was used as the reference state in the report’s statistical analysis. In Arizona, systems were 23 times more likely to be low-priced.
Low-priced systems were more likely to have these attributes:
- Larger in size and self-installed.
- Installed in markets with fewer active installers, in areas with lower household densities.
- Include Chinese-brand panels and thin-film panels.
- Less likely to have micro-inverters, battery backup, or tracking mechanisms.
- Less likely to use building-integrated components.
- Less likely to be installed in new construction.
The authors noted that residential PV capacity increased by a factor of eight between 2009 and 2014 as installed prices fell by 50%. In 2014, 32% of all new U.S. electrical generation capacity came from PV; 20% of that was residential.
“Widespread adoption of PV will depend, in part, on the economics of those systems,” Wiser said. “By studying the attributes of low-priced PV systems, we can begin to identify what can be done to facilitate those conditions and thereby drive down PV system prices nationwide.”
To learn more about the report, you can register for a at 10 a.m. Pacific (1 p.m. Eastern).