I had the honor of being within a few feet of a barn owl this weekend at the wildlife festival at the . Kept alive after being injured years ago and now a frequent visitor to classrooms and museums, this bird of prey was perched on the arm of a handler, who wore thick falconry gloves.
Unlike hawks and eagles, which hunt by sight and chase down their prey at great speed, the barn owl can hunt entirely by sound, and uses velvety-soft wings to glide in for the surprise catch. To help locate mice in snow, leaves, or hay, barn owls have asymmetrically placed ears: instead of being opposite each other, as human ears are, barn owl ears are 15 degrees above and below center. The minute time difference—as little as 0.00003 seconds—at which sound hits the ears allows the owl to triangulate and tell whether the mouse is left or right, near or far, and up or down.
Our electric meters are dumb
Compared with barn owls, our electric meters are pretty dumb. They detect just one piece of information—how much electricity is being used, measured in kilowatt-hours on your electric bill—and while you can look at a meter and see how much power is flowing at a given time, meters are typically read once a month, or even less often, and need to be visited in person.
If you wanted to design a meter to provide information for accurate monthly billing, this is how you would do it. But let’s say you, as a consumer, wanted to know how much power you were consuming at a given moment, and be able to easily make adjustments to your demand to spend less money, particularly if your utility prices power differently depending on the time of day. (It costs utilities more money to deliver power during “peak” periods, but they often charge one rate for an entire billing period.)
Demand response and the smart grid
Or let’s say you were the utility, and on a hot summer day when everyone’s air-conditioners were cranking up, you’d like to be able to crank something else down—like say, everyone’s washing machines—to smooth out demand. Doing so might help you meet demand with more efficient “baseload” power plants, keeping generally less-efficient “peaking power plants” offline.
In these cases you might want to have a “smart grid.” The “grid” part of the equation is the network that conveys electricity from plants to consumers. It includes power lines, substations, transformers, and switches. Just like a “smart” phone opens up a world of applications that come from adding a computer to your phone, the “smart” part of the grid means computerizing the electric utility grid.
Appliances and other potential innnovations
When fully implemented, a smart grid would need all meters, voltage sensors, fault detectors, and similar devices to be enabled with digital sensors and two-way digital communication. The central utility could “listen” to the devices and adjust and control them from a central location.
One potential smart-grid innovation is for appliances within homes to be embedded with devices that would allow them to receive signals from the utility telling them when rates are favorable for turning themselves on or performing energy-intensive functions, like automatic defrosting on a refrigerator. into refrigerators, ranges, clothes washers and dryers, dishwashers, and microwave ovens. (It says that customers will be able to override the automatic functioning.) One study in Washington State showed that consumers, armed with devices informing them of favorable times to use energy-intensive appliances, saved money.
Public distrust of utilities and smart meters
Widespread deployment of smart grid technologies may be a ways off, however. As Alan Meier wrote earlier this year in Home Energy magazine (), utilities, regulators, and governments have done a terrible job in deploying smart meters. Weak public relations and policy efforts have left a vacuum of public opinion, which has gradually filled with distrust.
As Meier wrote, “The balance of benefits from smart meters overwhelmingly favors the utility. Among other features, smart meters permit time-of-use pricing. This is a sensible idea, and if consumers carefully limit their electricity demand—yet another complex technical concept to understand and manage—they will get lower bills. But without simple in-home devices and controls, a great many customers will enjoy few or no financial benefits, no matter how hard they try to manage demand. Then, to add insult to injury, privacy restrictions won’t even give customers ownership of their consumption data. Right now, some customers can’t even access their data.” (See to get the public on board due to concerns about pricing.)
Are wireless devices a health hazard?
Furthermore, some people have been freaking out about the radio waves generated by smart meters, which use wireless technology to transmit data to utilities. As power and gas companies have begun installing them, some customers have protested (with a few reporting the onset of mysterious illnesses after installation), and some studies have claimed that radio frequency exposure might exceed U.S. Federal Communications Commission (FCC) limits (see chart).
Although the objectivity of this study is challenged by smart meter opponents,
, in Brattleboro, Vermont, which publishes information on green building solutions.