GBA Logo horizontal- lakesideca.info Facebook- lakesideca.info LinkedIn- lakesideca.info Email- lakesideca.info Pinterest- lakesideca.info Twitter- lakesideca.info Instagram- lakesideca.info YouTube Icon- lakesideca.info Navigation Search Icon- lakesideca.info Main Search Icon- lakesideca.info Video Play Icon- lakesideca.info Audio Play Icon- lakesideca.info Headphones Icon- lakesideca.info Plus Icon- lakesideca.info Minus Icon- lakesideca.info Check Icon- lakesideca.info Print Icon- lakesideca.info Picture icon- lakesideca.info Single Arrow Icon- lakesideca.info Double Arrow Icon- lakesideca.info Hamburger Icon- lakesideca.info TV Icon- lakesideca.info Close Icon- lakesideca.info Sorted- lakesideca.info Hamburger/Search Icon- lakesideca.info
Musings of an Energy Nerd

All About Dry Wells

A dry well can be anything from a rock-filled hole in the ground to an engineered system with concrete components

A dry well is a type of hole in the ground designed to accept rainwater. If the dry well is designed properly, it can hold a volume of water for a while, and allow the water to slowly soak into the surrounding soil.

A dry well can be a simple system with a small capacity, or it can be an engineered system designed to handle large inflows of stormwater. Most residential systems are fairly simple, and don’t cost much to install. In this article, we’ll look at all the options.

It’s fairly common for a dry well to receive rainwater collected from roof gutters. If that’s the type of system you are thinking of installing, the bottom of the gutter downspout is connected to a solid (unperforated) 4-inch PVC drainpipe. Alternatively, the downspout can lead to a small plastic catch basin, and the water from the catch basin can lead to the dry well.

A dry well can also accept the discharge from a basement sump pump.

If you have a way to collect storm water that flows off of an impermeable surface on your property — for example, a driveway — you may want to direct that water to a dry well.

In some communities, it may even be legal (and desirable) to send water from your washing machine to a dry well. My advice: don’t hook up washing machine water to a dry well without first contacting your local code authority to see if this approach is legal in your jurisdiction.

Needless to say, you don’t want to locate your dry well near your foundation (since a dry well discharges water, and everyone wants a dry foundation). At a bare minimum, your dry well needs to be located 10 feet from your foundation. Farther is…

GBA Prime

This article is only available to GBA Prime Members

Sign up for a free trial and get instant access to this article as well as GBA’s complete library of premium articles and construction details.

12 Comments

  1. User avater
    Armando Cobo | | #1

    How many dry wells would it take to capture a 2" rain in a 2000 sf house. I can't imagine a 50 gal. dry well taking too long to fill up, and even the 230 gal. as well.
    If my 2 minute math is correct, and 1 ft³=7.5 gals, then 6 ft² @ 2" rain contains 7.5 gal... therefore 2000 roof at 2" rain will run-off 333 gal.. So anything over 1/2" rain will overflow the 50 gal. dry well and 1.4" of rain will overflow the 230 gal. dry well. Am I correct?

    1. Malcolm Taylor | | #3

      Armando,
      We make make dry-wells from holes lined with fabric and filled with drain-rock. We use two to three yards of rock. As soon as the downspouts start to discharge water into the pit, it also begins to dissipate it, so the pit doesn't need to have the capacity to hold the entire amount of rain that will fall on the roof. Where things get complicated is if the surrounding soil gets saturated and can't dissipate water at the same rate. In climates such as ours in the PNW, swales and catchment ponds can often be a more reliable solution.

      1. User avater
        Armando Cobo | | #5

        Thanks Malcolm - We've done catchment ponds and swales, but I haven't come across a plastic or small concrete dry well. I guess in the Southwest US would work well, specially with their sandy soils. Just in Sept - Oct in DFW, we've received over 20" of rain spread once or twice a week, and that made me think of the effectiveness of those dry wells. I guess for our houses we would need at least 1000-1500 gal. dry wells minimum.

        1. Malcolm Taylor | | #9

          Armando,
          One of the things I've learnt from your posts and blogs over the years is that building in your climate requires a completely different knowledge and set of assumptions than ours up here. Your guess as to what size you'd need is as good as mine.

          1. User avater
            Armando Cobo | | #10

            Ya mean ya ain't got Mesquite, Yuccas, Cactus and heap of sand up yonder in the PNW?

  2. Antonio Oliver | | #2

    Can a septic system (abandoned) be used as a dry well?

    1. Malcolm Taylor | | #4

      Antonio,
      Yes, there is no reason a septic system that was abandoned and is still in good working order can't be used as a dry-well. However that's a pretty rare thing to have. Most were abandoned because they we're failing, or have subsequently not been maintained.

      1. Antonio Oliver | | #7

        I will be connecting to sewer during a remodel and rolling all the cost together. I live on a sloped lot and the county may require me to do some water manage if I alter my property grade--which I plan to do. I thought the abandoned septic system might be a perfect dry well. That being said, the septic system is over 60 years old, and I don't know how it would handle occasional (cleaner) liquid (but in greater short term inlet rates and volumes) compared to it's current contents.

        1. Malcolm Taylor | | #8

          It should work fine. Our district makes us either remove or fill unused septic tanks with sand. So you might have to bypass the tank and go straight to the distribution box. Having the tank isn't much of benefit anyway because the intake and outlet are close to the same height, so it always says full and you don't get to use that storage during storms.

  3. Deleted | | #6

    “[Deleted]”

  4. Andy Kosick | | #11

    I would be careful with the term "landscape fabric". Much of what is sold under this name (especially at big box stores) is of extremely poor quality. Spending a little more on good quality filter fabric for a dry well would be my recommendation.

    1. Malcolm Taylor | | #12

      Andy,

      That's a good point. Some of it is just plastic with a few perforations.

Log in or become a member to post a comment.

Related

  • Musings of an Energy Nerd

    All About Vapor Diffusion

    Building scientists talk about several different moisture transport mechanisms. Most of these mechanisms — for example, water entry due to a roof leak — are easy to understand. Other transport…

  • Musings of an Energy Nerd

    All About Basements

    Foundation discussions can get heated. For some reason, builders often dig in their heels when the topic of slabs versus crawl spaces versus basements comes up. It’s time to declare…

  • Building Science

    All About Climate Zones

    One of the fundamental principles of building science is that buildings must be suited to their climate. When they're not, problems can ensue. Maybe it's just that they're not as…

  • Musings of an Energy Nerd

    All About Rainscreens

    UPDATED on June 24, 2018 with new product information Twenty years ago, very few residential builders knew what a rainscreen was. These days, however, it’s no longer unusual to see…

Community

Recent Questions and Replies

  • |
  • |
  • |
  • |