Bieber Wood Passivhaus Windows

Credit: Bieber Architectural Windows

What makes this product green?

  • Reduces heating and cooling loads
  • Certified wood


French manufacturer Bieber makes high-performance wood windows, including some certified by the PassivhausA residential building construction standard requiring very low levels of air leakage, very high levels of insulation, and windows with a very low U-factor. Developed in the early 1990s by Bo Adamson and Wolfgang Feist, the standard is now promoted by the Passivhaus Institut in Darmstadt, Germany. To meet the standard, a home must have an infiltration rate no greater than 0.60 AC/H @ 50 pascals, a maximum annual heating energy use of 15 kWh per square meter (4,755 Btu per square foot), a maximum annual cooling energy use of 15 kWh per square meter (1.39 kWh per square foot), and maximum source energy use for all purposes of 120 kWh per square meter (11.1 kWh per square foot). The standard recommends, but does not require, a maximum design heating load of 10 W per square meter and windows with a maximum U-factor of 0.14. The Passivhaus standard was developed for buildings in central and northern Europe; efforts are underway to clarify the best techniques to achieve the standard for buildings in hot climates. Institut to meet Passivhaus standards for airtightness and thermal performance. These double- and triple-glazed windows range in overall U-factorMeasure of the heat conducted through a given product or material—the number of British thermal units (Btus) of heat that move through a square foot of the material in one hour for every 1 degree Fahrenheit difference in temperature across the material (Btu/ft2°F hr). U-factor is the inverse of R-value. from 0.14–0.27 with center-of-glass U-factors ranging from 0.09–0.20, tested to European Standard EN 10077. Aluminum or bronze claddingMaterials used on the roof and walls to enclose a house, providing protection against weather. is available. The sealed units, filled with argonInert (chemically stable) gas, which, because of its low thermal conductivity, is often used as gas fill between the panes of energy-efficient windows. or kryptonA colorless, odorless inert gas, often used with argon in fluorescent lighting and sometimes used as gas fill in high-performance glazing., range from 24–40 mm. The frames, available in pine, eucalyptus grandis, French oak, and larch, are typically 68 or 78 mm deep. The pine and eucalyptus grandis windows are FSCNonprofit organization that promotes forestry practices that are sustainable from environmental and social standpoints; FSC certification on a wood product is an indicator that the wood came from a well-managed forest.-certified. EPDM gasketing and a multi-step profile create a triple-seal for superior airtightness.

Additional Info


  • Forest Stewardship Council (FSC)


Manufacturer Information

Bieber Architectural Windows
1100 Quail St.
Newport Beach, CA 92660
Phone: 714-425-5234
Fax: 714-677-1666

Listed in: Wood Windows