Arxx Walls & Foundations

Arxx Walls & Foundations

Credit: Arxx Corporation

What makes this product green?

  • Reduces heating and cooling loads
  • Pre-consumer recycled content

Description

Arxx standard 6" ICFs are comprised of two 2-3/8"-thick EPSExpanded polystyrene. Type of rigid foam insulation that, unlike extruded polystyrene (XPS), does not contain ozone-depleting HCFCs. EPS frequently has a high recycled content. Its vapor permeability is higher and its R-value lower than XPS insulation. EPS insulation is classified by type: Type I is lowest in density and strength and Type X is highest. panels separated by 99% post-industrial recycled polypropylene plastic webbing on 8" centers. The webbing serves as strapping for attachment of interior and exterior finishes and as support for steel reinforcing rods within the wall. Each standard interlocking Arxx block is 4' long, 16-3/4" high, and 11-1/2" thick with a steady-state R-valueMeasure of resistance to heat flow; the higher the R-value, the lower the heat loss. The inverse of U-factor. of 22.1. Other thicknesses (4", 8", and 10") and configurations are available, as are a number of accessories that facilitate construction.

Links

Manufacturer Information

Arxx Corporation
800 Division St.
Cobourg, ON K9A 5V2
Canada
Phone: 905-373-0004
Fax: 888-672-1729
Toll-free: 800-293-3210

Listed in: Insulating Concrete Forms

 


источник

ссылка

best-cooler.reviews/