with David Joyce VIDEO TRANSCRIPT: David Joyce: Now that we have the window opening all prepped and ready to go, the first thing we do is wrap the opening with Ice & Water Shield.
1. Introduction (free) 2. Strip Siding and Roofing (free) 3. Install Housewrap and Roof Underlayment 4. Install Rigid-Foam Over the Walls 5. Install Rigid-Foam on the Roof 6. Flash Windows Over Rigid Foam 7. Choosing Details and Materials (free)
Narrator: The first part of the window install is pan flashing. In this case, Dave is using peel-and-stick membrane. The existing window stool acts as a back dam, and the sill already slopes toward the outside. Corners are the trickiest spot. It’s important to fit the flashing tape right into the corners so that the window frame won’t puncture them later. Stretch the flashing past the corner so that it covers the critical spot in the bottom corner of the sill. David Joyce: We want to make it to that wood framing and to the foil face. I put an inch or two onto that foil face so that I can get the rest definitely back to the wood. I’ve just got to cut straight across. I don’t try to be right on the edge like I would for most windows. I really want to stretch the Ice & Water Shield. Narrator: Realistically, this is probably fine. But to be sure, Dave adds a butterfly patch at the bottom corners. The side pieces overlap the bottom piece, and the top goes over the sides. The peel-and-stick membrane at the top of the window is more for air-sealing than water management. The membrane encapsulates the foam, bringing the air seal from the outside of the foam back to the header. Metal head flashing will handle the bulk…