Corners and connections are where insulation and air barriers can have trouble. Compressed or insufficient insulation can cause cold spots, which lead to condensation, mold, and rot. Air leaks at this connection can cut the effectiveness of the insulation substantially. In cold climates, this is where ice dams begin.
To keep the air barrier continuous, span the wall sheathing over the framing connection and use adhesive or sealants at framing connections as shown.
Roofs and walls need to dry
Moisture from both outside and inside a house can thwart your best efforts at keeping the building dry. Moisture in roof and wall assemblies is inevitable, so it's a good idea to design them so that they can dry. Roofs and walls that can dry to either the outside or inside are good, but those that can dry both directions are even better.
Double-stud walls use common materials and familiar assemblies to create a low-tech, energy-efficient wall with lots of room for thick insulation. This framing method virtually eliminates thermal bridging through the studs and greatly reduces sound transmission through walls.
The basic strategy is simple: The exterior walls are built from two parallel stud walls with a gap between the rows for extra insulation. Many builders use two parallel 2x4 walls with a 5-inch gap between them to create a 12-inch-thick wall. Of course, the wall can be thicker or thinner as circumstances dictate.
The most commonly used insulation for this method of construction is dense-packed cellulose, although other types of insulation (including blown-in fiberglass, mineral wool batts, or open-cell spray polyurethane foam) can certainly be used.
For more information, see GBA Encyclopedia: Double-Stud Walls.
Vented attics can keep a roof dry
Outdoor air that enters soffit vents and is exhausted through a ridge vent can help roof sheathing to…
This article is only available to GBA Prime Members
Sign up for a free trial and get instant access to this article as well as GBA’s complete library of premium articles and construction details.
Already a member? Log in