[Editor’s note: Roger and Lynn Normand are building a [no-glossary]Passivhaus[/no-glossary] in Maine. This is the 13th article in a series that will follow their project from planning through construction.]
We hired Jackson Tree Services to cut down over 30 mature pine trees along the north and west perimeter of our lot. I was saddened to watch these stately pine trees topple over one by one, felled by the relentless bite of owner Lee Jackson’s chainsaw and his strong-armed supporting crew, Dan and Justin. But moving EdgewaterHaus’ footprint as far from the steep banks on the east and south sides of our lot was a critical priority. That placed the house footprint squarely in the midst of these trees. These trees had to go.
Lee and his crew hustled tirelessly throughout a warm, breezy, overcast day with intermittent showers, never stopping except to sharpen the chainsaw or rig guy-lines from the chipper to safely cut the next tree. I believe you could put a dime on the ground along the centerline of where the tree would fall, and Lee would drop the tree dead on top of it. All the tree limbs went into the chipper, which broadcast the bite-size pieces of wood and pine needles across the lot where they will decompose to add to the organic matter in the soil.
At the end of the day, all that was left to cut were some nine “sticks” — a.k.a. narrow trees — that Lee would return the next day to cut down with the help of the boom on the logger’s truck.
Maine is mostly forest
Maine is known as the Pine Tree State, with over 90 percent of the state forested. White pine trees tower over other the deciduous and coniferous trees that cover 17 million forested acres across the state. Forest products have played a prominent role throughout the history of Maine, from the early wooden shipbuilding industry along Maine’s rugged coast line, to paper mills still in operation in central Maine. No wonder the pine tree is prominently displayed on the state flag.
Many of the lakefront cottages I remember visiting when I was a kid had been built from pine trees growing on the site. The land was cleared, the pine logs brought to a nearby family-operated sawmill, and the lumber hauled back to the site to be used to frame and sheath the building and cover interior spaces. Many of these cottages still stand today with their exterior painted clapboards and unfinished knotty pine interiors that have aged from an initial creamy white color to a rich golden tan.
Here’s a video showing the logging operation.
Can we turn our trees into lumber?
So what to do with 30 plus reasonably good quality mature pine trees?
Just like previous generations, why not use some of the lumber in EdgewaterHaus? In fact, why not use it in one room — say, the three-season room that overlooks the river?
We had long ago decided that we wanted this room to have a very different look and feel than the rest of the house. We wanted it to have a greater connection to the outdoors. Using knotty-pine boards for the interior walls and ceiling, with boards milled from pine trees harvested from our lot, would give the room the sense of a traditional Maine waterfront camp, and form a continuing bond to the land from which EdgewaterHaus would rise.
In search of a sawmill
But how to get the logs milled into lumber? The tiny sawmills that once dotted the area have long disappeared. (For more on this topic, see Local Food, Local Wood.)
I tried to find someone with a portable sawmill. I have often seen Wood-Mizer brand portable sawmills being sold at the woodworking shows I occasionally attend. I did meet with one individual who operated a portable sawmill and could cut the logs on site, but the logistical challenges seemed ill-suited to the task. The benefits of milling the lumber on site were negated by questions of how to load these big logs onto the portable mill, how to get rid of the bark and log off-cuts, and how to remove the remaining unsuitable logs from our lot.
So I explored hauling the logs to one of two remaining saw mills within a 50-mile radius of EdgewaterHaus. One mill was running at capacity to fulfill commercial contracts and not interested in my small job. However, Hurd Lumber Company, a third-generation family sawmill located along the Maine-New Hampshire border in tiny Acton, Maine, was willing to do the job.
And we find a trucker…
At the suggestion of Lee Jackson of Jackson Tree Service who had cut the trees, we hired Tim Chick of Chick Forest Products in Gorham, Maine (no web site, but Tim can be reached at 207-632-3062). Tim would select the best logs and haul them to Hurd Lumber, and then return to take the remaining logs for pulp.
Here’s a video of Tim cutting the trunks to log lengths and loading the logs on his truck.
The first article in this series was Kicking the Tires on a Passivhaus Project. Roger Normand’s construction blog is called .