Last week I wrote about an innovative foundation insulation material, Foamglas, that we used in our new house in Dummerston. This week I’ll talk about the open-web rafters we’re using to achieve a superinsulated roof.
First, a little background. There are several approaches to creating highly insulated roofs.
When the insulation is installed in the attic floor (creating an unheated attic), it’s easy to obtain very high R-values inexpensively — it’s cheap, that is, as long as you don’t count the cost of the lost living space by creating an unheated attic. Basically, you just dump in a lot of loose-fill cellulose or fiberglass on the attic floor, filling the joist cavity and more.
I’ve heard of as much as two feet of cellulose insulation being installed in this manner, achieving about R-80. To make room for a lot of insulation at the roof eaves, it’s usually necessary to install “raised-heel” trusses for the roof framing, so that the insulation thickness at the edges is not significantly compromised.
If you want to insulate the sloped roof, creating living space — as we are doing — you can either install very deep rafters (14 inches or more) that can be filled with cavity-fill insulation, or you can provide more modest roof trusses or rafters and then add a layer of rigid insulation on top of the roof sheathing. An advantage of the latter approach is that the layer of rigid insulation controls the “thermal bridging” through the rafters or top chords of the roof trusses.
To keep the insulation costs down and to minimize our use of foam-plastic insulation, we opted for the former option — putting all our insulation in the rafter cavities rather than installing a second layer of outboard insulation.
Finding deep enough rafters
To achieve the 16-inch depth we wanted for insulation and an air space under the sheathing, we used open-web, parallel-chord trusses as the rafters. These trusses, typically used as joists, have diagonal bracing or “struts” and are made in Quebec by .
Unlike most parallel-chord trusses, Tri-Force uses solid wood, rather than OSB, and finger-jointed glue joints rather than metal truss plates for attaching chords and webs. Some experts are concerned about the long-term durability of OSB webs in more common I-joists and the metal fasteners in standard roof trusses.
The chords on Triforce joists are either 2x3s or 2x4s, and the diagonal struts are solid-wood 2x2s, allowing vent baffles to be attached to the top chord (providing a 1-1/2″ vent space). Connections between the struts and chords are achieved with precision-machined grooves and polyurethane adhesive. The wood is all northern, slow-grown spruce, rather than plantation-grown southern yellow pine or poplar.
Triforce joists include a section of OSB at the ends so that the length can be adjusted. This permits manufacturing in standard lengths and keeps the costs down.
Providing a stem wall and roof overhang
In our case, to expand the living area in the upstairs of our compact house, Eli Gould added “raised heels” to the roof trusses. The OSB tails on the Triforce rafters made this fairly straightforward, though it certainly involved some additional labor. The design at the roof eaves also provides for nearly two feet of roof overhang — a high priority in keeping moisture off the wall and away from the windows and foundation.
Despite the extra work with the raised heel and overhang, the rafters went up quickly. Eli’s crew worked all day on the Saturday before Superstorm Sandy came through to get the roof up and sheathed with (with joints taped). They were able to keep everything remarkably dry.
We have not made a final decision about the type of insulation we will use for the roof. We are deciding between dense-packed cellulose and acrylic-stabilized, blown-in fiberglass (probably ). With 14 inches of insulation (allowing for the vent space under the sheathing), the difference in weight between cellulose (at about three pounds per cubic foot) and Spider (1.8 pounds per cubic foot) is significant.
With either material, we believe that by stapling up mesh-fabric baffle on each rafter we will be able to fill each rafter cavity (up to the vent space) completely — including all the corners where the diagonal struts intersect the chords. The small amount of acrylic adhesive in the JM Spider product may prove to be a significant benefit to us in fully sealing the cavities — so we’re leaning in that direction.
The two materials provide similar insulation values: about R-4.1 to 4.2 per inch for the JM Spider fiberglass and about R-3.7 per inch for dense-packed cellulose. With 14 inches of insulation, that would come to about R-58 with JM Spider, vs. R-52 with dense-pack cellulose.
From an environmental standpoint, cellulose has a higher recycled content (about 80% recycled newspaper), though fiberglass insulation is now made using a significant amount of recycled glass (mostly from beverage containers). Johns Manville fiberglass is certified to have a minimum 25% recycled glass content (with 80% of that recycled content being post-consumer).
Flame retardants are not required in the fiberglass, while borate and ammonium sulfate flame retardants are used in cellulose.
Here’s the product listing in our .
Alex is founder of . and executive editor of . He also recently created the . To keep up with Alex’s latest articles and musings, you can .