While our homes and cars get most of the attention relative to energy savings, our materials stream also has a huge impact on energy use. Nationally, the U.S. generates about 236 million tons of municipal solid waste each year, according to the . That works out to about 4 pounds of waste for every American every day.
Recycling our waste saves a lot of energy. Just how much depends on the material. With very energy-intensive materials, like aluminum, carpeting, and copper, a phenomenal amount of energy is saved because the new materials take so much energy to produce. Recycling just one ton of aluminum cans saves 209 million British Thermal Units (Btu), according to EPA; with 5.8 million Btu in a barrel of crude oil, that’s equivalent to 36 barrels of oil.
Here’s how much energy is conserved from recycling one ton of various other materials according to the same 2005 EPA report: carpeting–106 million Btu (18 barrels of crude oil); copper wire–83.1 million Btu (14 barrels); high-density polyethylene milk jugs–51.4 million Btu (8.9 barrels); steel cans–20.5 million Btu (3.5 barrels); newspaper–16.9 million Btu (2.9 barrels); and glass–2.7 million Btu (0.47 barrels).
Nationally, our recycling rate is 30.6% (it’s about 17% in Brattleboro, Vermont), and that recycling saves the country roughly 1.5 quads of energy per year, according to the report (one quad is equal to one quadrillion or thousand-trillion Btus), or about 1.5% of our nation’s total annual energy consumption. Boosting the national recycling rate to 35% would increase the total savings by another 0.23 quads–an amount equivalent to nearly 41 million barrels of crude oil. That’s over ten times the highest estimate of the amount of oil that has entered the Gulf of Mexico from BP’s Deepwater Horizon spill during the last two months–not an insignificant amount of energy savings!
Recycling not only saves energy, it also preserves natural resources and reduces pollution. A ton of virgin paper requires about 20 trees, and Americans use, on average, 730 pounds of paper (about a third of a ton) per year. Virgin aluminum is made from bauxite, much of which is mined in ecologically fragile regions, such as Brazil’s rainforests. Copper is produced from deep, open-pit mines around the world that create some of the worst water pollution anywhere. The processing of all these materials generates huge quantities of air pollution.
The easiest way to encourage recycling is to make it economically attractive to do so, and the easiest way to do that is to charge people for throwing away trash. That’s the intent of pay-as-you-throw (PAYT) municipal waste programs, such as the program being considered for Brattleboro. When we pay a flat fee for trash collection, we don’t have an incentive to generate less trash and recycle more.
Paying a flat fee for trash pick-up (whether that fee is hidden in property taxes, like in Brattleboro, or paid directly) is sort of like paying a flat fee for heat. Think about it. If I didn’t pay more when I use more heating oil, I wouldn’t have a financial incentive to tighten up my house or use a setback thermostat at night. That’s the fundamental flaw with standard trash collection; we don’t have any incentive to produce less.
Putting market forces to work with PAYT would not only increase recycling rates, but it might also encourage us to buy stuff with less packaging and to avoid throw-away paper plates and plastic utensils. It’s great when people want to save energy because it’s the right thing to do (helping the environment, reducing our nation’s dependence on foreign oil, etc.), but to change the habits of a lot of people we need to make it economically attractive to do so. That’s why PAYT makes so much sense. Establish a price for waste generation, and let market forces change our habits.
I invite you to share comments on this blog. Any experience to share on how PAYT works in your community?
Alex Wilson is the executive editor of and founder of . To keep up with his latest articles and musings, you can .